RCT17XH

• Supports Vanadium Oxide uncooled sensor to measure target’s temperature.
• Seamless support for ISM version 2.0
• Temperature measuring range: 35 °C to 45 °C (95 °F to 113 °F), accuracy: ± 0.1 °C, deviation: ± 0.5 °C
• Fast temperature measurement mode: Detects face and takes body temperature without identity authentication.
• Multiple authentication modes are available: card and temperature, face and temperature, card and face and temperature, etc.
• Displays temperature measurement results on the authentication page and triggers voice prompt when fever.
• Face mask alert: If the face being recognised does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is validated.
• Transmits online and offline temperature information to the client software via TCP/IP communication and saves the data on the client software.
• Configurable door status (open/close) when detecting fever.
• Face recognition duration < 0.2 s/User; face recognition accuracy rate ≥ 99%. • 50,000 face capacity, 50,000 card capacity, and 50,000 event capacity. • Suggested height for face recognition: between 1.4 m and 1.9 m. Recognition distance: 0.3 to 2 m • Supports 6 attendance status, including check in, check out, break in, break out, overtime in, overtime out. • Watchdog design and tamper function. Audio prompt for authentication result. NTP, manually time synchronization, and auto synchronization. • Built-in Mifare card, Felica card, and DESfire card reading module. • Connects to secure door control unit via RS-485 protocol to avoid the door opening when the terminal is vandalised.