• 508 dpi high-definition.
• Supports PnP (Plug-and-Play).
• Scratch resistant optical fingerprint sensor.
• Windows XP, Windows & & Windows 10 operating system compatible.
• Configuration & operation via client software.
• USB2.0 communication standard for data transmission with power over USB.
• Image composition of fingerprint images from three sample scans.
The AFR01 is a non-contact detection device for targets such as vehicles and pedestrians. It works in the millimeter wave band. The radar detector transmit linear frequency-modulated continuous wave signals to the target to perform high-speed real-time processing on the target’s reflected echoes to achieve fast target detection.
The AFR01 has the advantages of convenient installation and maintenance. Damage to the road surface can be avoided without any impact to vehicle access with this application of advanced technology,The Anti-Fall Radar is reliable and stable in operation, with a low cost vs. performance. The unit is user presetable of the detection distance, works in all-weather condition and compatible with straight or foldable barrier arm.
• Robust high torque 90W DC motor with 1.6 seconds open time (straight 3m arm).
• Supports optional visual indicator.
• Supports additional external infrared sensor for additional protection to passing vehicle.
• Supports external induction coil for vehicle sensing.
• Suitable for Standard Parking Lot Application
• 15.6-inch main screen and 11.6-inch auxiliary screen.
• Main screen support touch screen.
• Front-facing dual 2MP HD camera for capturing visitor face image.
• Supplementary light for use in dark-environment.
• Adjustable camera angle for variable visitor height.
• Built-in Mifare / EM card enrollment reader for issuance of visitor pass.
• Dual network interface that supports TCP/IP communication protocol.
• Built-in barcode & QR code scanner for reading preregistered tickets.
• Built-in thermal printer for printing of visitor pass.
• 12 pairs of IR sensors to detect tailgating & unauthorised entrance or exit.
• Brushless DC motor with 5 million swing operations. Customisable audio prompt.
• Remote door control via keyfob up to 32 units per barrier.
• Light indicator to indicate traffic direction.
• Obstruction detection during open/close cycle.
• Forced entry detection with automatic lockout.
• Self-detection, self-diagnostics and audible and visible alarm output upon detection of intrusion, reversed traffic, tailgating and forced entry.
• User preset door open duration with time out upon non pass-through.
• Support people counting and multiple persons passing through upon authentication.
• Door release upon fire alarm trigger.
• Remote control via Control Client software.
The EMT530L is an electro mechanical turnstile. Mechanical drive unit with solenoid locking mechanism eliminate the use of expensive electric motor. This semi automatic design allows the EMT530L to be more economical. Sturdy robust internal mechanical parts design maximize its durability for industrial usage. Spare parts are easily available for service and maintenance to reduce down time.
The EMT530L can effectively control high volume human traffic (up to 25 person per minutes) while maintaining a welcoming atmosphere. They can easily be integrated with any electronic system for ticketing, access control or time attendance.
The EMT530L is suitable for indoor. They are optimized to be an economically viable solution for transportation hubs, factories, colleges, commercial buildings, libraries, recreation parks, banks or any facilities that requires entry control.
• Brushless DC motor with 5 million swing operations.3
• Bidirectional or Single Direction Operation.
• Light indicator to indicate traffic direction.
• Obstruction detection during open/close cycle.
• Forced entry detection with automatic lockout.
• Self-detection, self-diagnostics and audible and visible alarm output upon detection of intrusion, reversed traffic, tailgating and forced entry.
• User preset door open duration with time out upon non pass-through.u
• Auto release upon fire alarm trigger.
• Remote control via Control Client software.
• Adopts deep learning algorithm to recognise facial features more accurately and fast.
• Supports multiple authentication modes (face recognition, biometric fingerprint and RFID card).
• 5-inch LCD touch screen for display of terminal status and menu operation for configuration.
• Optical CMOS fingerprint module. The characters of fingerprint can be exported to other readers.
• Maximum storage of 20000 face images and 5000 fingerprints.
• One of the fastest and accurate facial recognition engine of <1s per person with 99% accuracy.
• Expansion port for one external card reader via RS-485 or Wiegand communication.
• Connection to external controller via Wiegand communication.
• Accurate data and time display provided by built-in electronic clock and watchdog program.
• Tamper-proof function.
• WiFi Connectivity for wireless operation.
• 4.3-inch touch screen with 2 MP wide-angle dual-lens.
• Deep learning algorithm face recognition with distance: 0.3 m to 3 m and anti-spoofing feature.
• 6,000 face capacity, 10,000 person capacity for device support fingerprint related functions and 150,000 event capacity.
• Face recognition distance < 0.2 s/User; face recognition accuracy rate ≥ 99%.
• Capture linkage and captured pictures storage.
• Transmits user data from or to the client software via TCP/IP protocol and saves the data on the client software.
• Imports pictures from the USB flash drive to the device or export pictures, events, from the device to the USB flash drive.
• Stand-alone operation.
• Manage, search and set device data after logging in the device locally.
• Connects to one external card reader via RS-485 protocol.
• Connects to secure door control unit via RS-485 protocol to avoid the door opening when the terminal is destroyed.
• Connects to external access controller or Wiegand card reader via Wiegand protocol.
• Two-way audio with indoor station and master station.
• Supports 6 attendance status, including check in, check out, break in, break out, overtime in, overtime out.
• Configuration via the web client.
• Remotely opens door and starts live view via mobile app.
• Supports QR Code Recognition.
• Supports ISAPI and EHome 5.0 protocol.
• 4.3-inch touch screen with 2 MP wide-angle dual-lens.
• Deep learning algorithm face recognition with distance: 0.3 m to 3 m and anti-spoofing feature.
• 6,000 face capacity, 10,000 card capacity, 5,000 fingerprint (RCF04MF) capacity for device support fingerprint related functions and 150,000 event capacity.
• Face recognition distance < 0.2 s/User; face recognition accuracy rate ≥ 99%.
• Capture linkage and captured pictures storage.
• Transmits card and user data from or to the client software via TCP/IP protocol and saves the data on the client software.
• Imports pictures from the USB flash drive to the device or export pictures, events, from the device to the USB flash drive.
• Stand-alone operation.
• Manage, search and set device data after logging in the device locally.
• Connects to one external card reader via RS-485 protocol.
• Connects to secure door control unit via RS-485 protocol to avoid the door opening when the terminal is destroyed.
• Connects to external access controller or Wiegand card reader via Wiegand protocol.
• Two-way audio with indoor station and master station.
• Supports 6 attendance status, including check in, check out, break in, break out, overtime in, overtime out.
• Configuration via the web client.
• Remotely opens door and starts live view via mobile app.
• Supports QR Code Recognition.
• Supports ISAPI and EHome 5.0 protocol.
• Supports Vanadium Oxide uncooled sensor to measure target’s temperature.
• Seamless support for ISM version 2.0
• Temperature measuring range: 35 °C to 45 °C (95 °F to 113 °F), accuracy: ± 0.1 °C, deviation: ± 0.5 °C
• Fast temperature measurement mode: Detects face and takes body temperature without identity authentication.
• Multiple authentication modes are available: card and temperature, face and temperature, card and face and temperature, etc.
• Displays temperature measurement results on the authentication page and triggers voice prompt when fever.
• Face mask alert: If the face being recognised does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is validated.
• Transmits online and offline temperature information to the client software via TCP/IP communication and saves the data on the client software.
• Configurable door status (open/close) when detecting fever.
• Face recognition duration < 0.2 s/User; face recognition accuracy rate ≥ 99%.
• 50,000 face capacity, 50,000 card capacity, and 50,000 event capacity.
• Suggested height for face recognition: between 1.4 m and 1.9 m. Recognition distance: 0.3 to 2 m
• Supports 6 attendance status, including check in, check out, break in, break out, overtime in, overtime out.
• Watchdog design and tamper function. Audio prompt for authentication result. NTP, manually time synchronization, and auto synchronization.
• Built-in Mifare card, Felica card, and DESfire card reading module.
• Connects to secure door control unit via RS-485 protocol to avoid the door opening when the terminal is vandalised.
• The elevator access control system consists of the Elevator Main Controller (IEC3138) and the Elevator Floor Control Unit (IEC3016).
• The Elevator Main Controller can provide access control of up to 128 floors.
• Supports TCP/IP communication to the management software while connecting to the Elevator Floor Control Unit and RFID card readers via RS-485.
• Connectable up to 3 groups of Elevator Floor Control Unit, each group consists of up to 8 Elevator Floor Control Units
• Support 3 types of lift call: Button, Call Elevator and Auto Button preset-able via DIP switch setting.
• Up to 128 floor permission can be controlled, 20,000 cards and 50,000 event log.
• Supports up to 256 schedule templates, each schedule template supports up to 1 week plan and 4 holiday groups.
• Elevator Main Controller supports 5 control inputs and 5 control outputs for events.
• Multiple authentication modes: Card, Fingerprint, Password, ID, Super Password & Duress Code.
• Remote control via web client and VMS / ISM.
• Supports NTP time synchronization manually and automatically.
• Watchdog & Tamprer-proof function
• Elevator Floor Control Unit (IEC3016) connects up to 16 relays to control the floor buttons of the elevator.
• Preset-able DIP switch setting for device address.
• Event reporting back to Elevator Main Controller via RS-485 link.
• 32-bit high-speed processor TCP/IP network communication, with self-adaptive network interface and secured encrypted communication data.
• Maximum 20 digit card number, up to 100,000 cards (expandable up to 200,000) and 300,000 events (expandable up to 600,000).
• Supports multi-door interlocking function, anti-passback, multi-card, first card, super card and super password function.
• Supports alarm event upload (including tamper-proof alarm, unsecured door alarm, forced entry alarm, delayed door alarm, duress card and code alarm, blacklist alarm and alarm for invalid card swiping attempts).
• Short circuit attempts alarm and open circuit attempts alarm. Supports zone alarm input.
• Supports RS485 interface and Wiegand interface for accessing card reader. Wiegand interface supports W26/W34 and is seamlessly compatible with third-party card reader with Wiegand interface.
• Supports various card types such as normal/ disabled/blacklist/ patrol/ guest/ duress/super card, etc.
• Status indicators to show device status.
• Supports time synchronization via NTP, standby battery and watchdog for device running status detection.
• 32-bit high speed processor.
• Supports RS485 and Wiegand (W26/ W34) communication protocol.
• Tamper-proof alarm.
• Watchdog circuit to prevent operation lock-up with automatic self-reboot feature.
• Dust-proof and water-proof design.
• Built-in buzzer for status indication and LED indicator for door status display.
• Built-in EM card reader module (125 kHz) for E models.
• Built-In Mifare card reader module (13.56 MHz, ISO14443-A) for M models.
• Built-In keypad for password protection for K models.
• 32-bit high speed processor.
• Supports RS485 and Wiegand (W26/ W34) communication protocol.
• Tamper-proof alarm.
• Watchdog circuit to prevent operation lock-up with automatic self-reboot feature.
• Dust-proof and water-proof design.
• Built-in buzzer for status indication and LED indicator for door status display.
• Built-In Mifare card reader module (13.56 MHz, ISO14443-A).
• Built-In keypad for password protection (CR02KM).
• 32-bit high speed processor.
• Supports RS485 and Wiegand (W26/ W34) communication protocol.
• Tamper-proof alarm.
• Watchdog circuit to prevent operation lock-up with automatic self-reboot feature.
• Dust-proof and water-proof design.
• Built-in buzzer for status indication and LED indicator for door status display.
• Built-In Mifare card reader module (13.56 MHz, ISO14443-A).
• Built-In keypad for password protection (CR03KM).
• 32-bit high speed processor.
• Supports RS485 and Wiegand (W26/ W34) communication protocol.
• Tamper-proof alarm.
• Watchdog circuit to prevent operation lock-up with automatic self-reboot feature.
• Dust-proof and water-proof design.
• Built-in buzzer for status indication and LED indicator for door status display.
• Built-in EM card reader module (125 kHz) for E models.
• Built-In Mifare card reader module (13.56 MHz, ISO14443-A) for M models.
• Built-In keypad for password protection for K models.
• Encrypted data for the security of fingerprint storage.
• Supports RS485 communication with 19200bps-N-8-1 transmission rate.
• Card induction distance of 30mm to 100mm.
• Supports multiple authentication modes (card, fingerprint, and card + fingerprint).
• Optical CMOS fingerprint module. The characters of fingerprint can be exported to other readers.
• Maximum storage of 5000 fingerprints.
• Adopts the optical fingerprint module, supporting 1:N mode (fingerprint,card+fingerprint) and 1:1 mode (card+fingerprint).
• Fingerprint comparison time: 1:1≤1s,1:1000≤1s;FRR≤0.01%,FAR≤0.001%
• Communication circuit with optical coupling isolation and noise suppression function.
• Built-in buzzer for status indication.
• Accurate data and time display provided by built-in electronic clock and watchdog program.
• Tamper-proof function.
